The Multi-Pak series of Small Bottled Air Carts has been designed with the user in mind. Ideal for use in confined space entry, hazmat, fire rescue and by emergency response teams or in water/sewage treatment facilities.

Designed for workers wearing respirators in IDLH or hazardous environments where positive pressure breathing air must always be assured. In the event of an electrical failure, or if the main line air pressure drops below 60 psi, the Auto-Air Breather Box automatically switches to a separate reserve air cylinder.

These portable/fixed Grade-D Filtration Systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide repirator users with Grade-D quality air and monitors for the presence of CO.

Point-Of-Attachment (POA) Series provides remote manifold capability for respirator users.

The cost-effective, portable Ambient Air Pump brings clean, breathable air from outside a contaminated environment to a supplied air respirator or hood.

Low-pressure Portable Ambient Air Pumps are designed specifically for use with Type-C Constant Flow Respirators (0-15 psi).

The cost-effective, portable Ambient Air Pump brings clean, breathable air from outside a contaminated environment to a supplied air respirator or hood.

The COOL-BOX provides low-cost cool air anywhere and can operate with any airline Type-C mask or hood-style respirator.

Designed for use with Pressure Demand Respirators only. The first high-pressure portable three-man breathing air compressor that operates on standard 115VAC/60 Hz/20 amp electrical service.

This portable monitor unit connects easily to any high or low pressure compressed air breathing source and monitors air for CO content.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Saccharin Fit Test Kit performs OSHA compliant qualitative fit test on disposable and reusable dust and mist respirators. Kit includes:

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

The Bitrex Fit Test Kit tests all disposable and reusable dust and mist respirators for OSHA compliance. Shown to be safer and equally as accurate as saccharin tests.

Perform qualitative fit tests on air-purifying respirators with a Smoke Test Kit.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

The Quick Charger is used to charge PA1 or PA2 Blowers.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

An Intrinsically Safe Battery is ideal when using a 3M™ Breathe Easy™ Belt-Mounted PAPR around hazardous flammable materials.

The Standard Charger is used to charge PA1 or PA2 Blowers.

The 3M™ Smart Battery Charger BC-210 is intended to charge the 3M™ Battery Pack BP-15 only with the 3M™ Breathe Easy™ Belt-Mounted Turbo Powered Air Purifying Respirator (PAPR) Unit.

Recharge the NiCad battery pack on your Air-Mate PAPR with one of 3M’s SmartCharger Battery Chargers.

The PA30 Series Powered Air Purifying Respirator provides a high level of airflow, which greatly enhances worker comfort.

The PA30 Series Powered Air Purifying Respirator provides a high level of airflow, which greatly enhances worker comfort.

The OptimAir MM2K Powered Air-Purifying Respirator (PAPR) is designed for work in abatement, nuclear, lead, and other hazardous particulate environments. The PAPR filters particulates and provides a constant flow of respirable air to the Ultravue® or Ultra Elite® Facepiece.

Constant air flow to either a full Ultravue® facepiece provides protection from particulates, toxic gases and vapors, or a combination of these hazards.

Comfortable padded belt accommodates a PA1 or PA2 Blower.

The PA20 Series Powered Air Purifying Respirator lets you choose a PAPR that provides ideal protection for a specific work environment.

The PA30 Series Powered Air Purifying Respirator provides a high level of airflow, which greatly enhances worker comfort. It offers more than 7-1/2 cfm airflow for at least six hours.

The PA30 Series Powered Air Purifying Respirator provides a high level of airflow, which greatly enhances worker comfort. It offers more than 7-1/2 cfm airflow for up to 10 hours.

Primair Series Headgear is loose-fitting and adjustable for a secure fit.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood. The blower runs on batteries and is mounted to the user's belt, giving that worker greater mobility and the ability to operate in a wide variety of environments. To assemble your own custom-designed system, simply follow these four steps: Choose a Head Assembly; Choose a Breathing Tube; Choose a PAPR Assembly; and Choose a Cartridge/Filter.

Air-Mate Hoods and Head Covers are made of durable, economical DuPont Tyvek QC, that has been "quality coated" with 1.25-mil polyethylene for reduced permeability to moisture, vapor and air.

The 3M full facepiece 6000DIN Series provides versatile protection against various harmful gases, vapors, and particulates.

Keep your Compact Air PAPR assembly in good working condition and avoid the costs of replacing an entire PAPR system.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

Replacement Filter Cartridges provide respiratory protection from specific hazards when used with a PA30 PAPR System.

A full selection of Filters, Cartridges and Filter/Cartridge Combinations ensures protection from specific workplace hazards.

Gasketed high-efficiency filter fits securely inside the PA20 Blower.

Before you choose your 3M™ Belt-Mounted PAPR Assembly, you should choose either the lightweight, 40" H-115 Breathing Tube, the 36" GVP-122 Reusable Breathing Tube, or the GVP-123 Breathing Tube (for use with the 3M™ Full Facepiece 7800S).

Twist-lock connector makes connecting quick and easy.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The GVP-1 Belt-Mounted Assembly includes a motor blower, battery pack, charger, flow meter, power cord, blower plugs, and web belt.

The Compact Air provides a high level of respiratory protection in a convenient and lightweight belt-mounted design. NIOSH approved.

A smooth finish, gasketed design and downward sloping shape give the PA20 Blower a “decon-friendly” housing.

The GVP-1 Belt-Mounted PAPR Assembly uses the GVP-100 PAPR Motor Blower, which is designed for use with certain 3M helmets, hoods, loose-fitting headgear, tight-fitting facepieces and appropriate cartridges and filters to create NIOSH-approved respirator systems.

The W-5114 Breathing Tube is used with 3M Supplied Air System H-Series Hoods.